Motorola BSR 64000 Reference Manual page 541

Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable upstream <port> power-level <power>
no cable upstream <port> power-level <power>
Command Syntax
port
power
Command Default
0 dB
Command Example
The following example shows how to use the cable upstream power-level command
to set the upstream input power level to +5 dBmV in absolute mode, which keeps the
input power level at +5 dBmV regardless of the upstream channel bandwidth setting,
as shown below:
MOT(config-if)# cable upstream 0 power-level 50
port number representing the location of the
un-installed card
The input power level, expressed in dB.
CMTS Commands
13-71