Ip Vrrp Authentication Type - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

ip vrrp authentication type

The ip vrrp authentication type command specifies the type of authentication to use
for the given virtual router on the configured interface. The no ip vrrp
authentication type command removes the specified type of authentication to use for
the given virtual router on the configured interface.
The same authentication type must be configured on all routers for a given virtual
router. Authentication mismatch will not prevent a router from taking over as the
designated Master. Authentication mismatch may cause VRRP not to work properly
for a given virtual router due to authentication failure, and results in lack of
communication between virtual routers.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip vrrp <1-255> authentication type {text}
no ip vrrp <1-255> authentication type
Command Syntax
1-255
text
Command Default
no authentication
10-8
the identification number of a configured
virtual router
ip vrrp 4 authentication type authentication
type can be simple text