ip ospf cost
The ip ospf cost command establishes a precise cost metric value for sending a packet
on an OSPF interface. The no ip ospf cost command disables a precise cost metric
value for sending the path cost to the default.
Use the ip ospf cost command to assign a cost metric value for a particular interface.
The user can set the metric manually if the default needs to be changed.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip ospf cost <cost:1-65535>
no ip ospf cost
Command Syntax
cost
link state metric, between 1 and 65535
OSPF Commands
8-21