Cable Insert-Interval - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

cable insert-interval

The cable insert-interval command insert-interval the sets the frequency at which the
initial maintenance interval is to appear in MAP messages. The no cable
insert-interval command removes the setting.
Note: The insertion time is the initial request for a connection to the network.
The interface must be shut down before the user can issue this command.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable insert-interval <milliseconds>
no cable insert-interval <milliseconds>
Command Syntax
port
milliseconds
Command Default
2000 milliseconds
13-32
Downstream port.
Length of time, from 100 to 2000
milliseconds, during which the cable modem
can request a network channel.