Neighbor Ebgp-Multihop - Motorola BSR 64000 Reference Manual

neighbor ebgp-multihop

The neighbor ebgp-mulithop command accepts route updates from external peers
residing on the network that are not directly connected. The no neighbor
ebgp-mulithop command blocks route updates.
Use the neighbor ebgp-multihop command to modify BGP peer groups for unified
configuration by specifying a peer-group-name.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
neighbor {<A.B.C.D> | <WORD>} ebgp-multihop <1-255>
no neighbor {<A.B.C.D> | <WORD>} ebgp-multihop <1-255>
Command Syntax
A.B.C.D
WORD
1-255
IP address of external peer, BGP neighbor
external BGP group name
the maximum hop count - if no value is
entered, the default value of 255 is used
BGP Commands
16-29