tunnel mode
The tunnel mode command sets the encapsulation mode for the tunnel interface. The
no tunnel mode command disables the encapsulation mode for the tunnel interface.
Use the tunnel mode command to set the encapsulation type while sending packets
over the tunnel.
Group Access
ISP
Command Mode
Interface Configuration (tunnel interface only)
Command Line Usage
tunnel mode {ipip | gre | dvmrp}
no tunnel mode {ipip | gre | dvmrp}
Command Syntax
ipip
gre
dvmrp
Command Default
IP in IP encapsulation
IP in IP encapsulation
Generic Route Encapsulation (GRE) protocol
over IP
Distance Vector Multicast Routing Protocol
IP Commands
2-75