Cable Modem Qos Dsc - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

cable modem qos dsc

The cable modem qos dsc command triggers a Dynamic Service Change (DSC)
initiated by the CMTS for a specified cable modem (CM).
cable modem <ip-address> | <mac-address> qos dsc <TFTP-address>
<config-filename>
Command Syntax
ip-address
mac-address
TFTP-address
config-filename
Command Mode
Privileged EXEC
Command Use
The cable modem qos dsc command triggers a dynamic service change (DSC)
initiated by the CMTS for a specified cable modem. The definition of the dynamic
service is defined in a binary file that conforms to the DOCSIS cable modem's
configuration file format. This configuration file is saved in /tftpboot directory on a
TFTP server with known IP address. The current implementation only the change of
service based on service-flow (not the flow classifier, nor the
payload-header-suppression).
Command Notes
The definition of the dynamic service is defined in a binary file that conforms to the
DOCSIS cable modem configuration file format. This configuration file is saved in
the /tftpboot directory on a TFTP server with a known IP address. The current
implementation only is the change of service based on service-flow (not the flow
classifier, nor the payload-header-suppression).
13-36
CM.
CM MAC address.
TFTP server IP address.
CM configuration binary file.