BSR 64000 Command Reference Guide
passive-interface
The passive-interface command suppresses routing updates from being transmitted
over a specific ethernet or cable routing interface. The no passive-interface
re-enables route updates to be transmitted over the routing interface.
Note: Updates from routers that are directly connected to the passive
interface continue to be received and processed.
Command Line Usage
passive-interface {cable <slot>/<interface> | ethernet <slot>/<interface> |
gigaether <slot>/<interface> | pos <slot>/<interface>}
no passive-interface {cable <slot>/<interface> | ethernet <slot>/<interface> |
gigaether <slot>/<interface> | pos <slot>/<interface>}
Command Syntax
cable
ethernet
gigaether
pos
slot
interface
Command Default
Routing updates are transmitted over the router.
Command Mode
Router Configuration
2-40
Cable interface.
Ethernet interface.
Gigabit Ethernet interface.
Packet-Over-SONET interface.
Module slot number.
Interface number.