Ip Access-Group - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

ip access-group

The ip access-group command configures an interface to use an access list. The no ip
access-group command does not allow incoming or outgoing packets.
Group Access
ISP
Command Mode
Interface Configuration
Command Mode
ip access-group {<num:1-199> <num:1300-2699> {in | out}
no ip access-group {<num:1-199> <num:1300-2699> {in | out}
Command Syntax
num:1-199
num:1300-2699
in
out
Command Default
No access groups defined.
2-16
Standard number range from 1 to 199.
Extended number range from 1300 to 2699.
Incoming packet is processed only if the
source-address is in the access-list.
Same as in, outgoing packet is processed only
if access-list permits the packet.