Pos Report - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

pos report

The pos report command enables selected SONET alarms for console logging for a
POS interface. The no pos report command disables selected SONET alarms for
console logging for a POS interfaces.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
pos report {all | b1-tca | b2-tca | b3-tca | lais | lrdi | pais | plop | prdi | rdool | sd-ber
| sf-ber | slof | slos}
no pos report {all | b1-tca | b2-tca | b3-tca | lais | lrdi | pais | plop | prdi | rdool |
sd-ber | sf-ber | slof | slos}
Command Syntax
all
b1-tca
b2-tca
b3-tca
lais
lrdi
pais
plop
prdi
rdool
15-14
enables/disables all possible alarm reporting
B1 Bit Error Rate (BER) threshold crossing alarm errors
B2 BER threshold crossing alarm errors
B3 BER threshold crossing alarm errors
line alarm indication signal
line remote defect indication
path alarm indication signal
path loss of pointer errors
path remote defect indication
receive data out of lock errors