logging on
The logging on command starts and stops the syslog, and sends debug and error
messages to a logging process. The no logging on command stops sending debug or
error messages to a logging process.
Use the logging on command to send debug or error messages to a logging process
for the syslog to generate the message to the designated locations.
Group Access
All
Command Mode
Global Configuration
Command Line Usage
logging on A.B.C.D.
no logging on A.B.C.D.
Command Syntax
A.B.C.D.
Command Default
no syslog message
IP address of the host used,
System Administration Commands
1-39