BSR 64000 Command Reference Guide
ip ospf priority
The ip ospf priority command sets router priority to aid in determining the OSPF
designated router for a network. The no ip ospf priority command changes priority to
aid in determining the OSPF designated router for a network to the default value.
Use the ip ospf priority command value to configure OSPF broadcast networks. The
router with a higher priority takes precedence when attempting to become the
designated router. If the routers share the same priority, router ID takes precedence.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip ospf priority <num:0-255>
no ip ospf priority <num:0-255>
Command Syntax
num:0-255
Command Default
1
8-26
priority value