ip rip send version
The ip rip receive version command
packets from a specific version of the
version command to configure the interface to transmit one or both RIP versions. The
no ip rip receive version command resets the RIP protocol version to RIP version 2.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip rip send version {0, 1, 2, 3}
no ip rip send version {0, 1, 2, 3}
Command Syntax
0
1
2
3
Command Default
2
configures an interface to only transmit
RIP protocol. Use the ip rip receive
RIP 2 compatible
RIP version 1 only
RIP version 2 only
none
RIP Commands
7-11