debug ip ospf
The debug ip ospf command displays Open Shortest Path First (OSPF)-related
activity. The no debug ip ospf command turns off OSPF-related debugging.
Use the debug ip ospf command to turn on debugging for IP OSPF. The debug ip
ospf command can be used to do the following:
•
Confirm that the routers match the same IP mask
•
Verify same hello interval
•
Verify same dead interval
•
Verify neighbors are part of the same area
Group Access
ISP
Command Mode
All modes except User EXEC
Command Line Usage
debug ip ospf {adj | dr | lsa | packet | retransmission | events}
no debug ip ospf {adj | dr | lsa | packet | retransmission | events}
Debug Commands
4-21