Cable Privacy Cm-Auth Reset - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

cable privacy cm-auth reset

The cable privacy cm-auth reset command resets a Traffic Encryption Key (TEK)
before expiration on a grace-time or a life-time value. The cable privacy cm-auth
reset command changes the TEK expiration back to the default.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable privacy cm-auth reset <mac-address> <action>
no cable privacy cm-auth reset
Command Syntax
mac-address
action
Command Default
profile 1
13-46
cable modem MAC address of 6 bytes
number between 1 and 4:
1 noReset requested - causes CMTS to do
nothing
2 invalidateAuth - causes CMTS to invalidate
current CM authorization key, does not
transmit an Authorization Invalid message to
the CM, does not invalidate unicast TEKs
3 sendAuthInvalid - causes CMTS to
invalidate current CM authorization key, does
not transmit an Authorization invalid message
to CM, does not invalidate unicast TEKs
4 invalidateTeks - causes CMTS to invalidate
current CM authorization key, to transmit an
Authorization Invalid message to the CM,
and to invalidate all unicast TEKs related to
this CM authorization