Show Clns Interface - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

show clns interface

The show clns interface command displays the CLNS interface status and
configuration.
The show clns interface command output is as follows:
interface
CLNS protocol
processing
Checksums
enabled
MTU
Next Esh/Ish
Routing Protocol
Circuit Type
Metric
Priority
Circuit ID
Number of active
level-1 adjacencies
Number of active
level-2 adjacencies
18-28
The specific interface is described in the output and is
described as being up (functional) and the line protocol as
being up (functional) or administratively down.
Describes whether or not the CLNS protocol is enabled or
disabled.
The checksums can be enabled or disabled.
The maximum transmission unit size for a packet on this
interface.
Shows when the next ES hello or IS hello packet is sent on this
interface.
Describes the routing protocol on this interface. Below this
field, information for Level 1 and/or Level 2 is displayed.
Indicates whether the interface has been configured for local
routing (Level 1), area routing, (Level 2), or local and area
routing (Level 1 and 2).
Indicates the routing metric assigned to the Level 1 or Level 2
router.
Indicates the priority of the IS on this interface.
Indicates the ISIS circuit ID.
Indicates the number of active Level 1 adjacencies.
Indicates the number of active Level 2 adjacencies.