Set Tag - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

set tag

The set tag command sets the value of the destination routing protocol.
The route-map global configuration command and the match and set route-map
configuration commands are used together to define the conditions for redistributing
routes from one routing protocol into another. Each route-map command has a list of
match and set commands associated with it. The match commands specify the
conditions for redistribution for the current route-map command. The set commands
specify the particular redistribution actions to perform if the criteria enforced by the
match commands are met. The no route-map command deletes the route map.
Group Access
ISP
Command Mode
Route-map Configuration
Command Line Usage
set tag <0-4294967295>
Command Syntax
0-4294967295
Command Default
if not specified, tag is forwarded to the new destination protocol
16-60
tag value