Ip Proxy-Arp - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

ip proxy-arp

The ip proxy-arp command enables proxy ARP on the interface. The no ip
proxy-arp command disables proxy ARP on an interface.
Note: If a host in the local network is incapable of responding to an ARP
request for some reason, the router will respond on behalf of the host when
proxy arp is enabled and the IP-to-MAC address mapping of the host is
stored in the router with a static arp command, with the alias option specified.
To verify ARP status, use the show running-config command.
The BSR will also respond to an ARP request for a network on a different
interface when proxy ARP is turned on.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip proxy-arp
no ip proxy-arp
Command Default
disabled
2-34