Offset-List - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

offset-list

The offset-list command adds an offset to incoming and outgoing metrics to routes
learned via RIP. The offset value is added to the routing metric. An offset-list with an
interface slot/port is considered extended and takes precedence over an offset-list that
is not extended. The no offset-list command removes the offset for incoming and
outgoing metrics to routes learned via RIP.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
offset-list {1-99} [any] {in | out} <0-16> [cable | ethernet | gigaether | pos] [<x/y>]
no offset-list {1-99} [any] {in | out} <0-16> [cable | ethernet | gigaether | pos]
[<x/y>]
Command Syntax
1-99
any
in
out
0-16
cable
ethernet
gigaether
7-14
standard access-list-number, if 0, no action is
taken
apply offset to all networks
apply the offset to incoming metrics
apply the offset list to outgoing metrics
positive offset to be applied to metrics for
networks matching the access list, if set to 0,
no action is taken
Cable interface
Ethernet interface
Gigabit Ethernet interface