Cable Sync-Interval - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

cable sync-interval

The synchronization message interval is the interval between successive
synchronization message transmissions from the BSR CMTS interface to the CMs.
The cable sync-interval command sets the synchronization interval between
transmission of successive SYNC messages from the CMTS to CMs. The no cable
sync-interval returns the interval setting to transmit SYNC messages to the default.
Note: Ensure that you disable the cable interface using the cable shutdown
command
Ensure that you disable the cable interface using the cable shutdown command. Use
the cable sync-interval command following an interface shutdown.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable sync-interval <milliseconds>
no cable sync-interval
Command Syntax
milliseconds 0-200
13-56
Minimum and maximum sync interval.