Show Controllers - Motorola BSR 64000 Reference Manual

show controllers

The show controllers command displays detailed hardware and configuration
information for each module on installed in the BSR 64000 chassis.
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
show controllers cable <X/Y> [upstream <0-7> | downstream | mac ] [ | ]
[begin | include | exclude ] [<WORD>]
show controllers ethernet [<X/Y>] [ | ] [ begin | include | exclude ] [<WORD>]
show controllers gigaether [<X/Y>]
show controllers pos [<X/Y>]}
Command Syntax
cable X/Y
downstream
display cable interface controller
information for the specified BSR
chassis slot and port number
including RF signal information, the
type of hardware installed, FEC
information for both corrected and
uncorrected packets, the spectrum
group and the status of the cable
interface
display information for the
downstream port including
downstream modulation type,
frequency (label), and symbol rate
IP Commands
2-43