Ip Ospf Hello-Interval - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

ip ospf hello-interval

The ip ospf hello-interval command sets the number of seconds between hello
packets send by a router on the interface. The no ip ospf hello-interval command
resets the number of seconds between hello packets sent by a router on an interface to
the default value.
Use the ip ospf hello-interval command as a form of keepalive used by routers in
order to acknowledge their existence on a segment.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip ospf hello-interval <seconds:1-65535>
no ip ospf hello-interval
Command Syntax
seconds
Command Default
10
8-24
integer that specifies the interval, value must
be the same for all nodes on the network,
valid values 1 to 65535