show cable qos svc-flow statistics
The show cable qos svc-flow statistics command is used to determine the number of
dropped packets due to downstream rate-limiting for a particular service flow.
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
show cable qos svc-flow statistics [<slot>/<interface> [<svc-flow-id>]]
Command Syntax
slot
interface
service-flow-id
Command Default
Displays all the service flows in the system.
DOCSIS module slot number.
Cable interface number.
service flow identification 1-4292967295
CMTS Commands
13-145