Ip Igmp Version1-Querier - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

ip igmp version1-querier

The ip igmp version1-querier command configures the router to act as the querier
for IGMPv1. This is done by manually assigning the IGMP querier. The no ip igmp
version1-querier command disables the router from acting as the querier.
Note: The interface is not effected when IGMPv2 is running on the interface.
It is recommended that only one querier is enabled in a network segment.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip igmp version1-querier
no ip igmp version1-querier
Command Default
disabled
9-10