BSR 64000 Command Reference Guide
set weight
The set-weight command to set the route weight on the network. The first
autonomous system match determines the weight to be set.
Use the set weight command to set the route weight on the network. The first AS
match determines the weight to be set. The route with the highest weight is chosen as
the choice route when multiple routes are available on the network. Weights spoken
when an as path is matched, override any weight set by the neighbor command. Any
match clause is necessary which includes pointing to a "permit everything" to set tags
Group Access
ISP
Command Mode
Route-map Configuration
Command Line Usage
set weight <0-65535>
no set weight
Command Syntax
0-65535
16-62
weight value