BSR 64000 Command Reference Guide
redistribute
The redistribute command redistributes routes from one protocol domain to another
routing domain. The no redistribute command disables route distribution from one
protocol domain to another routing domain.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
redistribute {bgp | connected | isis [match {level-1 | level-1-2 | level-2}] | ospf
[match {internal | external | external 1 | external 2}] | static} [metric <1-16>]
[route-map <WORD>]
no redistribute {bgp | connected | isis [match {level-1 | level-1-2 | level-2}] | ospf
[match {internal | external | external 1 | external 2}] | static} [metric <1-16>]
[route-map <WORD>]
Command Syntax
bgp
connected
isis
level-1
level-1-2
level-2
7-18
BGP source protocol
established routes as result of IP enabled on
an interface
IS-IS source protocol
specifies that IS-IS Level 1 routes are
redistributed into RIP independently.
specifies that IS-IS Level 1 and Level 2 routes
are redistributed into RIP.
specifies that IS-IS Level 2 routes are
redistributed into RIP independently.