Show Cable Upstream - Motorola BSR 64000 Reference Manual

show cable upstream

The show cable upstream command displays the following upstream cable
information:
ifIndex:
centerFreq:
rng_back_st:
rng_back_en:
data_back_st:
data_back_en:
channelWidth:
powerLevel:
slotSize:
force-frag:
map-interval:
pre-equalization:
invited-range-interval:
range-forced-continue:
range-power-override:
physical-delay:
rate-limit:
modulation-profile:
max-calls:
Spectrum Group:
interface index
center frequency for cable modem use
initial ranging backoff fixed start value
initial ranging backoff fixed end value
initial data backoff fixed start value
initial data backoff fixed end value
radio frequency channel width
input power level
port minislot size in number of time ticks
forced fragmentation enabled
configured map interval value
pre-equalization adjustment enabled
the number of invited range interval requests
configured for this upstream channel
range forced continue enabled
range power override enabled
the upstream physical delay configuration
upstream data transmission rate-limit
physical layer profile characteristics
the maximum number of voice calls
configured for this upstream channel
the associated Spectrum Group name
CMTS Commands
13-153