Ip Irdp - Motorola BSR 64000 Reference Manual

ip irdp

The ip irdp command enables the ICMP Router Discovery Protocol (IRDP) on an
interface. The no ip irdp command disables the ICMP IRDP on an interface.
Group Access
ISP
Command Mode
Interface Configuration. The ip irdp command is not available on the cable interface.
Command Line Usage
ip irdp [address <A.B.C.D> | holdtime <num:1-9000> | maxadvertinterval |
minadvertinterval | multicast | preference]
no ip irdp [address <A.B.C.D> | holdtime <num:1-9000> | maxadvertinterval
<num:4-1800> | minadvertinterval <num:3-1800> | multicast | preference
<-2147483648-2147483647>]
Command Syntax
address
A.B.C.D
holdtime
num:1-9000
maxadvertinterval
num:4-1800
minadvertinterval
multicast
IP addresses to proxy-advertise, preference
value.
IP address to advertise.
amount of time, in seconds, advertisements
hold valid
value in seconds
maximum time between advertisements
value in seconds
minimal time between advertisement in
seconds
advertisements are sent with multicast
IP Commands
2-29