Default-Information Originate - Motorola BSR 64000 Reference Manual

default-information originate

The default-information originate command injects the default network in a routing
domain such as Border Gateway Patrol (BGP).The no default-information originate
command disables the default network redistribution in the routing domain.
The network 0.0.0.0 command in Router Configuration mode performs the same
function as the default-information originate command. In the Routing Information
Protocol (RIP) the metric is always set to 1. In BGP, the default route needs to exist in
the BGP routing database. BGP uses the metric associated with the default entry in its
database.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
default-information originate [always] [metric <0-16777214>] [metric-type
<1-2>]
no default-information originate [always] [metric <0-16777214>] [metric-type
<1-2>]
Command Syntax
originate
always
software generates a default external route
into an Open Shortest Path First (OSPF)
domain to propagate another route if a default
route exists
advertises the default route even when the
default route does not exist (OSPF only)
Routing Policy Commands
6-3