BSR 64000 Command Reference Guide
cable downstream power-level
The cable downstream power-level command sets the power level of a downstream
channel. The no cable downstream power-level changes the power level setting of a
downstream channel to the default.
Use the cable downstream power-level command to set the absolute power level in
tenths of dBmV. Use cable downstream power-level default to set the receive power
based on the automatic calculation of the necessary power level.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable downstream [<port>] power-level [value]
no cable downstream [<port>] power-level [value]
Command Syntax
port
value
Command Default
550 dBmV
13-14
Downstream port number.
An integer between 450 and 630; unit is in
tenth-dBmV.