Passive-Interface - Motorola BSR 64000 Reference Manual

passive-interface

The passive-interface command disables an interface from sending route updates by
prohibiting packets from being transmitted from a specified port. When disabled, the
subnet continues advertising to other interfaces. The no passive-interface command
enables the interface to send route updates.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
passive-interface {cable | default | ethernet | gigaether | pos} <x/y>
no passive-interface {cable | default | ethernet | gigaether | pos} <x/y>
Command Syntax
cable
default
ethernet
gigaether
pos
x/y
Cable interface
suppresses routing updates on all interfaces
Ethernet interface
Gigabit Ethernet interface
POS interface
BSR 64000 slot and port number
RIP Commands
7-17