hop action band
The hop action band command is used to determine the search order for each
frequency band during the frequency hop action.
Group Access
MSO
Command Mode
Cable Spectrum Group
Command Line Usage
hop action band {<start> <end>} [priority <number>]
no hop action band {<start> <end>} [priority <number>]
Command Syntax
start
end
number
The start upstream frequency band from
5000000 to 42000000 Hz.
The end upstream frequency band from
5000000 to 42000000 Hz.
The upstream band priority from 1 to 255.
When no priority is assigned, the default
priority is 128.
CMTS Commands
13-89