Table of Contents
Advertisement
- Install the base of the specific tool on the oil seal using the
screws provided.
Specific tooling
020622Y Transmission-side oil guard punch.
- Screw the threaded bar onto the base of the tool and ex-
tract the oil seal.
Specific tooling
020622Y Transmission-side oil guard punch.
R
EFITTING
G
-Check that the chain tightening sliding block is not worn.
- If so, replace it or install it in the reverse direction, making
it work on the opposed side.
- Remove the oil guard using the specific tools.
- Prepare the new oil guard lubricating the sealing lip
- Pre-assemble the oil guard with the specific.tool by slightly
tightening the screws.
- Insert the sheath on the driving shaft.- Insert the tool with
the oil guard on the driving shaft up to touch the crankcase
- Finally position the oil guard installing the bracket of the
specific tool.
- Screw the threaded bar on the driving shaft to travel end
- Using the nut, operate on the base of the specific tool to
perceive the oil guard mounting travel end.
- Remove all of the tool components according to the reverse
order
141
Advertisement
Table of Contents
