Table of Contents
Advertisement
1. SEAT SIDE TRIM
• Extract the 3 securing screws (2 Philips 3.6x14 self-
tappers and one 5x16 Allen M3) from each cover.
2. COWLING
• Extract the 6 screws (5x12 Allen M3) from under the
cowling.
- Extract the drawer for the tool kit and its cover, by
removing the 2 Philips screws with washers.
• Extract the 8 top screws (Philips 3.6x14 self-tappers
with washer) and the 2 side screws (Philips
6x16 with washer).
• Pull the cowling backwards slightly to access the turn
indicator connections and disconnect them.
• Extract the cowling backwards.
N.B.
TO REPLACE THE PILOT LIGHTS IT IS ONLY NECESSARY
TO EXTRACT THE TWO PILOT LIGHT SCREWS.
64
Advertisement
Table of Contents
