Download  Print this page

Inspecting The Clutch; Pin Retaining Collar - Derbi GP1 125-250 c.c. Workshop Manual

Gp1 125-250 c.c..
Hide thumbs

Advertisement

Table of Contents
I
NSPECTING THE CLUTCH
S C
G
C U C
- Check the thickness of the clutch mass friction material.
- The masses must exhibit no traces of lubricants; in that
case, check the driven pulley unit seals.
N.B.
UPON RUNNING-IN, THE MASSES MUST EXHIBIT A CEN-
TRAL CONTACT SURFACE AND MUST NOT BE DIFFERENT
FROM ONE ANOTHER.DIFFERENT CONDITIONS MAY
CAUSE THE CLUTCH TEARING.
CAUTION
DO NOT OPEN THE MASSES USING TOOLS TO PREVENT A
VARIATION IN THE RETURN SPRING LOAD.
Characteristic
Check. Minimum thickness
1 mm
P
P
IN RETAINING COLLAR
IN RETAINING COLLAR
- Remove the collar by hand by turning and pulling at the
same time.
N.B.
IN CASE OF DIFFICULTIES, USE 2 SCREW DRIVERS.
N.B.
BE CAREFUL NOT TO INSERT THE SCREW-DRIVERS TOO
MUCH TO PREVENT DAMAGES THAT COULD AFFECT THE
0-RING SEAL.
- Remove the 4 pins of the servo-system and separate the
half-pulleys.
76

Advertisement

Table of Contents

This manual is also suitable for:

Gp1 125 c.c.Gp1 250 c.c.

Comments to this Manuals

Symbols: 0
Latest comments:
  • LIAM May 27, 2017 06:12:
    HI HAVE JUST BOUGHT A DERBI 125 CC CROSS CITY, REALLY WOULD LIKE TO BUY A WORKSHOP MANUAL PLEASE CAN YOU HELP