Table of Contents
Advertisement
B
RAKES OVERHEATING
POSSIBLE CAUSE
Rubber gaskets expanded or sealed
Pump compensation holes clogged
Brake disc slackened or deformed
Defective piston sliding
BRAKING VIBRATIONS OR NOISE
V
IBRATIONS OR REFRAINED NOISINESS
POSSIBLE CAUSE
Brake disc slackened or deformed
ELECTRICAL SYSTEM
B
ATTERY
POSSIBLE CAUSE
Battery
242
WORK
Replace the gaskets.
Clean carefully and blow with compressed air.
Check the tightening of the brake disc screws; measure
the disc axial deviation using a comparator and keeping
the wheel mounted on the vehicle.
Check the caliper and replace any damaged parts.
WORK
Check the tightening of the brake disc screws; measure
the disc axial deviation using a comparator and keeping
the wheel mounted on the vehicle.
WORK
This is the system device that requires the most assiduo-
us surveillance and the most diligent maintenance.
If the vehicle is not used for a certain period (1 mon-
th and more), the battery needs periodical recharging.
The battery tends to go completely flat within around
3 months. When reinstalling the battery on the motor
cycle, be careful not to invert connections, considering
that the black earth wire must be connected to the ne-
gative terminal, whereas the other red wire must be
connected to the terminal marked with + sign.
Advertisement
Table of Contents
