Table of Contents
Advertisement
F
F
USES
USES
The electrical system is protected by a fuse located on the
r.h.s. of the battery bay. To replace it, lift the seat, remove
the battery access door and then the transparent fuse cover.
Ignition system, headlight, and taillight are not protected by
the fuses.
CAUTION
BEFORE REPLACING THE BLOWN FUSE, TRY TO ELIMINATE
THE FAULT THAT HAS CAUSED IT TO BLOW.
NEVER TRY TO REPLACE A FUSE USING DIFFERENT MATE-
RIAL (FOR EXAMPLE A PIECE OF ELECTRIC WIRE) OR A FUSE
WITH HIGHER AMPERAGE.
N°
PdC (A)
1
15
2
15
3
15
D
ISMANTLING THE BATTERY
WARNING
ENSURE THAT YOU DISCONNECT THE CABLE FROM THE
NEGATIVE TERMINAL FIRST.
FILLING WITH ELECTROLYTE
WARNING
DO NOT REMOVE THE ALUMINIUM SEALING STRIP THAT
SEALS THE FILLING HOLES UNTIL JUST BEFORE USING IT.
THE ELECTROLYTE CONTAINER SUPPLIED WITH THE BAT-
TERY MUST BE USED.
- Place the battery on a level surface.
- Remove the closing strip (A).
- Remove the electrolyte container from the bag.
- Detach the plug strip (A) from the container.
NOTA
- DO NOT THROW AWAY THE PLUG STRIP AS IT WILL BE
SUBSEQUENTLY USED AS BATTERY PLUGS.
-
DO NOT DETACH OR PERFORATE THE HERMETIC CLO-
SING SURFACES (B).
230
COLOUR BORN
Red - Red
Red/black - Brown
Red - Red/blue
DESCRIPTION
General
Lighting
Battery charge
Advertisement
Table of Contents
