Download  Print this page

Derbi GP1 125-250 c.c. Workshop Manual Page 143

Gp1 125-250 c.c..
Hide thumbs

Advertisement

Table of Contents
- Place the cover on the engine crankcase, apply the three
screws with copper washers and install the cover into its seat
by the three screws.
- Tighten the 3 screws at the prescribed torque.
CAUTION
DO NOT LUBRICATE THE SURFACE KEYED ON THE ENGINE
CRANKCASE.
CAUTION
ORIENTATE THE OIL GUARD BY POSITIONING THE CHAIN
HOUSING CHANNEL FACING DOWNWARDS. WHEN THE
POSITION IS REACHED, DO NOT RETRACT THE OIL GUARD.
FAILURE TO COMPLY WITH THIS RULE CAN CAUSE A WRONG
POSITIONING OF THE OIL GUARD SHEATH.
CAUTION
FAILURE TO COMPLY WITH THIS ASSEMBLY PROCEDURE CAN
SERIOUSLY DAMAGE THE ENGINE DUE TO THE WRONG TEN-
SIONING OF THE OIL PUMP CONTROL CHAIN.
Specific tooling
020622Y Transmission-side oil guard punch
142

Advertisement

Table of Contents

This manual is also suitable for:

Gp1 125 c.c.Gp1 250 c.c.

Comments to this Manuals

Symbols: 0
Latest comments:
  • LIAM May 27, 2017 06:12:
    HI HAVE JUST BOUGHT A DERBI 125 CC CROSS CITY, REALLY WOULD LIKE TO BUY A WORKSHOP MANUAL PLEASE CAN YOU HELP