Download  Print this page

Exhaust Bracket Overhaul/refitting - Derbi GP1 125-250 c.c. Workshop Manual

Gp1 125-250 c.c..
Hide thumbs

Advertisement

Table of Contents
O
O
VERHAUL
VERHAUL
- Remove the spring clip shown in the picture.
- Suitably support the silencer mounting bracket.
- Using special tool, extract bearing from its housing as
shown in the picture.
Specific tooling
020376Y Handle for punches
020456Y 0 24 mm adaptor
- Using a heat gun, heat up the bearing housing.
- Using the special drift, insert a new bearing in the housing
as shown in the picture.
Specific tooling
020376Y Handle for punches
020151Y Air heater
R
R
EFITTING
EFITTING
- For the reassembly, follow the operations indicated above
in the reverse order, complying with the tightening torques.
Locking torques (N*m)
Rear wheel spindle nut 104 ÷ 126
Silencer support arm screws on engine (*) 20 ÷ 25
Shock absorber bottom fixing 33 ÷ 41
182

Advertisement

Table of Contents

This manual is also suitable for:

Gp1 125 c.c.Gp1 250 c.c.

Comments to this Manuals

Symbols: 0
Latest comments:
  • LIAM May 27, 2017 06:12:
    HI HAVE JUST BOUGHT A DERBI 125 CC CROSS CITY, REALLY WOULD LIKE TO BUY A WORKSHOP MANUAL PLEASE CAN YOU HELP