Manual Acquisition; Setting Manual Acquisition Conditions; Manually Acquiring Targets - Furuno FAR-2807 Operator's Manual

3.6

Manual Acquisition

Maximum 100 targets may be acquired manually depending on the acquisition
condition set on the TT TGT menu.
3.6.1

Setting manual acquisition conditions

1. Right-click the arrow in the TT ACQ MODE box at the right side to show the
TT TARGET menu.
2. Select 1 TT SELECT.
3. Select MANUAL 100, AUTO 25, AUTO 50 or AUTO 75 as appropriate. For
details see the table on page 3-5.
4. Push the right button to close the menu.
3.6.2

Manually acquiring targets

By keyboard
1. Put the cursor on the target you want to acquire.
2. Press the [ACQ] key.
By trackball
1. With the cursor inside the effective display area, roll the scrollwheel to show
"TT TARGET DATA & ACQ" in the guidance box.
2. Put the cursor on the target you want to acquire.
3. Push the left button to acquire the target.
[TT TARGET MENU]
1 TT SELECT
MANUAL100/
AUTO 25/
AUTO 50/
AUTO 75/
AUTO 100
2 ALL CANCEL
NO/YES
3 REF TARGET VECTOR
OFF/ON
TT TARGET menu
3. TARGET TRACKING (TT)
3-7