Keyboard Test - Furuno FEA-2107-BB Operator's Manual

32.5

Keyboard Test

In addition to the color calibration tests mentioned in Chapter 26, the ECDIS provides a keyboard test that the
operator may use to check keyboard of the RCU-018. (Other diagnostic tests are also provided, on the self-test
menu, however these are intended for service technicians. For further details, see the service manual.)
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions area, then push the left mouse
button.
2. Choose Initial Settings and push the left mouse button.
3. Place the cursor on the triangle in the dialog box to show the Initial Settings menu.
4. Choose Selftest then push the left mouse button. You are asked if it is OK to leave ECDIS and start the self-test.
5. Click the OK button to show the self-test menu. As the message on the screen says move the cursor leftward and
upward then push the left mouse button.
32. Maintenance and Troubleshooting
32-5