Ttm - Tracked Target Message - Furuno FAR-2107 Series Service Manual

1.2.33 TTM - Tracked target message

$--TTM , xx , x.x , x.x , a , x.x , x.x , a , x.x , x.x , a , c—c , a , a , hhmmss.ss , a
1 2
*hh<CR><LF>
Contents
Data associated with a
tracked target relative
to own ship's position
1.2.34 VSD - UAIS Voyage static data
$--VSD, x.x , x.x , x.x , c--c , hhmmss.ss, xx , xx , x.x , x.x *hh<CR><LF>
1 2 3
Contents
This sentence is used to enter
information about a ship's
transit that remains relatively
static during the voyage.
Point of this information are use
in ITU-R- M.1371 message; 1,
2, 3, 5, and 9
3 4 5
Data
1 Target number, 00 to 99
2 Target distance, from own ship
Bearing from own ship, degrees,
3
true/relative, T/R
4 Target speed
Target course, degrees true/relative,
5
T/R
6 Distance of closest-point-of -approach
7 Time to CPA, minutes, "-" increasing
8 Speed/distance units, K/N/S
9 Target name
10 Target status
11 Reference target= R, null otherwise
12 UTC of data
13 Type of acquisition
4 5
1 Type of ship and cargo category, 0 to 255
Maximum preset static draught, 0 to 25.5
2
meter
3 Person on-board, 0 to 8191
4 Destination, 1-20 characters
5 Estimated UTC of arrival at destination
Estimated day of arrival at destination, 00
6
to 31 (UTC)
Estimated month of arrival at destination,
7
00 to 31 (UTC)
8 Navigational status, 0 to 5
9 Regional application flags
AP1-19
AP1.2 Configuration of NMEA Ver-3.00 Sentence
6 7 8 9 10 11
6 7 8 9
Data
12 13
Note
Target status:
L= lost, tracked target has been lost
Q= query, target in the process of
acquisition
T= tracking
A= automatic
M= manual
R= reported
Note