5.
GPS OPERATION
If the FURUNO GPS Navigator GP-320B is connected to this radar, you can set GP-
320B from this radar.
5.1
Navigator Mode
1. Press the MENU key to open the menu.
2. Use
3. Use
4. Use
5. Press the MENU key to close the menu.
5.2
Datum
Select the type of datum which matches the paper charts you use for navigation. Se-
lect [WGS-84] if the radar is connected to an AIS Transponder.
1. Press the MENU key to open the menu.
2. Use
3. Use
4. Use
[WGS-84] or [Tokyo], go to step 7. If you select [Other], go to the next step.
5. Use
6. Use
range is 001 - 192 and 201 - 254. Refer to the page AP-5 "GEODETIC CHART
LIST").
7. Press the MENU key to close the menu.
or
to select [GPS] and press the ENTER key.
or
to select [Mode] and press the ENTER key.
Mode options
or
to select [GPS] or [WAAS] then press the ENTER key.
or
to select [GPS] and press the ENTER key.
or
to select [Datum] and press the ENTER key.
Datum options
or
to select the type of datum and press the ENTER key. If you select
or
to select [Datum No] and press the ENTER key.
Datum No setting window
or
to select the datum number and press the ENTER key. (The setting
GPS
WAAS
WGS-84
Tokyo
Other
5-1
Need help?
Do you have a question about the FR-8045 and is the answer not in the manual?