Tuning The Receiver; Choosing The Tuning Method; Initializing Tuning - Furuno FAR-2807 Operator's Manual

1.10

Tuning the Receiver

1.10.1

Choosing the tuning method

The tuning method can be selected with the TUNE box at the top of the screen.
1. Select the TUNE box (TUNE AUTO or TUNE MAN) at the top of the screen.
Tuning method (AUTO or MAN)
2. Push the left button or scrollwheel to display TUNE AUTO or TUNE MAN as
appropriate.
3. If you used the scrollwheel to select tuning method, push the scrollwheel or
the left button to change setting.
1.10.2

Initializing tuning

Automatic tuning is initialized during the installation. However, if you feel that
automatic tuning is not working properly try re-initializing it as follows:
1. Left-click the MENU box to open the menu.
2. Select 1 [ECHO].
1 BACK
2 2
3 TUNE INITIALIZE
4 PM*
5 SART
6 WIPER
7 ECHO AREA*
8 [PICTURE SELECT]
9 STC RANGE
3. Select 3 TUNE INITIALIZE. (For operation from the keyboard, press the
[ENTER MARK] key.) "TUNE INITIALIZE" appears in the Alert Box during the
initialization.
4. Push the right button twice to close the menu.
[ECHO]
ND
ECHO REJ
OFF/ON
1
OFF/ON
OFF/ON
OFF/1/2
2
CIRCLE/WIDE/ALL
+00
ECHO menu
Tuning bar
TUNE AUTO
Tuning level
TUNE box
1
* Not available on FAR-2157/2167DS
2
* Not available on IMO or A type
1. RADAR OPERATION
Place arrow inside box
to adjust tuning, when
TUNE MAN is selected.
1-15