How To Configure Hot Keys F1-F4 - Furuno FCR-2107 Operator's Manual

1. Operational Overview
1.7

How to Configure Hot Keys F1-F4

Hot keys F1-F4 are provided to call a desired function/menu when pushed.
You can select desired function/menu from a predefined list. To select desired function/menu for each key, do the
following:
1. Spin the scrollwheel until Menu/Info/Chart Menu appears in
the guidance area.
2. Push the left button.
3. Spin the scrollwheel to select Initial Settings then push the
scrollwheel.
4. Put the cursor on the triangle in the menu to show the Initial
Settings menu.
5. Spin the scrollwheel to select Function keys, then push the
scrollwheel. The menu shown right appears.
6. Check Enable changes.
7. Put the cursor on the box for F1, F2, F3 or F4 as appropriate
and spin the scrollwheel to select desired function or menu.
Item
Radar, Radar Chart Mode
ALARM ACK
CHART MENU
CHART DISPLAY
SENSORS
MENU
STANDARD DISPLAY
SYMBOL DISPLAY
RANGE+
RANGE-
INITIAL SETTINGS
ECDIS Mode
ALARM ACK
CHART MENU
CHART DISPLAY
SENSORS
MENU
STANDARD DISPLAY
SYMBOL DISPLAY
TM/CU RESET
TOGGLE SHIP CENTER
RANGE+
RANGE-
INITIAL SETTINGS
How to activate a menu or function with a hot key
Push the function key corresponding to the menu or function you wish to activate.
1-10
Acknowledge alarm generated by this chart radar.
Open chart menu.
Open chart setting dialog box.
Open sensor setting dialog box.
Open main menu.
Restore standard display.
Show symbol display dialog box.
Shrink chart.
Enlarge chart.
Show initial settings dialog box.
Acknowledge alarm generated by this chart radar.
Open chart menu.
Open chart setting dialog box.
Open sensor setting dialog box.
Open main menu.
Restore standard display.
Show symbol display dialog box.
Return own ship to screen center in true motion and course-up modes.
Toggle own ship position between screen center and cursor location.
Shrink chart.
Enlarge chart.
Show initial settings dialog box.
Enable changes
Content