How To Change The Cursor Data Attributes (B/W-Type Only); How To Set Up Function Keys - Furuno FAR-2228-BB Operator's Manual

1.8.1

How to change the cursor data attributes (B/W-type only)

You can change the cursor bearing reference, cursor range unit, cursor size and also
align the cursor by latitude/longitude. Changing some of these settings affects the in-
dications in the cursor data display.
1. Open the menu.
2. Select [3 NAV TOOLS].
3. Select [3 EBL•VRM•CURSOR SET].
4. Select [9 CURSOR]. The [CURSOR] menu appears.
5. Select the item you want to change, referring to the list
below.
• [2 CURSOR BEARING]: Sets the bearing reference.
• [3 CURSOR RANGE]: Sets the unit for cursor range.*
• [4 CURSOR SIZE]: Sets the cursor size.
• [5 CURSOR L/L ALIGN]: Set whether to align the cursor with latitude/longitude.
*: Appears for B-types only.
6. Close the menu.
1.9

How to Set Up Function Keys

Some menu functions and menus can be assigned to a function key. This allows one-
touch access to the assigned function or menu.
To activate an assigned function, press the corresponding function key (F1, F2, F3 or
F4).
The current presets are listed at the bottom of the menu page and the function keys
are preset with the following functions:
F1: Interference Rejector, F2: Echo Stretch, F3:
AUTO-SEA, F4: AUTO-RAIN.
You can change the function assigned to each key
using the following procedure.
1. Open the [MAIN MENU].
2. Select [9 INITIAL SETTINGS].
3. Select [6 FUNCTION KEY SETUP]. The func-
tion key setup menu appears.
4. Select the function key to set up.
5. Referring to the following table of available func-
tions, select a function category, then left-click.
1. OPERATIONAL OVERVIEW
1-15