Instantaccess Bar ™ Buttons - Furuno FAR-2228-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.4.1 InstantAccess bar
Button
Upper Half
Standby/Transmit button.
Toggle between standby (STBY) and transmit (TX).
Pulselength button.
PULSE
Selects the pulselength.
L
Tune button.
TUNE
Toggles between automatic and manual tuning. (See section 1.17.1.)
MAN
Note: For SSD antennas, this button appears as "TX CH x" ("x" denotes the channel
used for transmission).
Interference Rejector button.
IR
Activates/deactivates the interference rejector feature.
OFF
Echo Stretch button.
ES
Activates/deactivates the echo stretch function.
OFF
Echo Average button.
EAV
Activates/deactivates the echo average function.
OFF
Note: This item is grayed out under the following conditions:
• ACE function is active.
• No position data is input (excludes Dead Reckoning).
ACE button.
ACE
Activates/deactivates the ACE (Auto Clutter Elimination) function.
OFF
Lower Half
Chart button.
CHART
• Shows/hides the chart.
ON
• Opens the [CHART] menu.
Note: Appears on A/B/W-types with Radar Plotter functionality only.
Radar Map button.
MAP
Shows/hides the radar map marks.
OFF
HEADING LINE button.
HL
Left-click and hold to hide the heading line, range rings and OS symbol.
OFF
CU/TM RESET button
CU/TM
• Puts the ship's heading at the top of the screen in course-up mode the moment this
RESET
button is pressed.
• Resets the ship's position to a point of 75% radius opposite to the extension of the
heading line passing through the display center in true motion modes.
Own Ship AIS button.
OWN
Shows the AIS VOYAGE DATA for AIS data setup.
AIS
AIS Message button.
Opens the AIS Message menu, allowing you to view received AIS messages.
AIS
Brilliance button.
PLT1
• Adjusts the screen brilliance
100
• Opens the [BRILLIANCE] menu.
• Selects the color palette. See section 1.45.1.
1-6
™
buttons
Description