How To Change The Echo Color; How To Display And Set Up Navigational Data; How To Set Up The Navigational Data - Furuno FAR-2218-BB Operator's Manual

1.44.2

How to change the echo color

1. Place the cursor on the [PLT] indication, inside the brilliance settings box at the
bottom-left of the screen.
The selected item appears highlighted with a light-blue colored box.
Right-click to show the [BRILL1] box menu.
2. Select [2 ECHO COLOR].
3. Select the appropriate color, then press the ENTER MARK key.
The available options are listed in the table below.
Color
YEL
GRN
WHT
AMB*
M-GRN*
M-CYA*
*: Available for B-type radars only.
1.45

How to Display and Set Up Navigational Data

Wind, depth, ocean current, water temperature, date and time and waypoint data can
be displayed on this radar, however appropriate sensors are required.
1.45.1

How to set up the navigational data

1. Open the menu.
2. Select [7 INFORMATION BOX].
3. Select [4 NAV DATA SETTINGS].
4. Referring to the table below, select the appropriate menu item, then press the EN-
TER MARK key.
Menu item
Page 1
[2 DEPTH]
[3 DEPTH GRAPH SCALE] [10], [20], [50], [100], [200], [500] (m)
[4 DEPTH MARK]
[5 CURRENT]
[6 WIND]
[7 WIND REFERENCE]
Page 2
[2 TEMPERATURE]
[3 WPT DATA]
5. Referring to the available options listed in the table above, select the appropriate
setting, then press the ENTER MARK key.
6. Close the menu.
Yellow echo (default setting)
Green echo
White echo
Amber echo
Red echo, gradually changes to green color as the echo weakens.
Red echo, gradually changes to cyan color as the echo weakens.
[OFF], [ON]; [m], [ft]
[000] to [500] (m)
[OFF], [ON]
[OFF], [ON]; [kn], [m/s]
[APPARENT], [NORTH], [THEORETICAL]
[OFF], [ON]; [°C], [°F]
[OFF], [REL], [TRUE]
1. OPERATIONAL OVERVIEW
Description/remarks
Available settings
1-81