Stapler Controller Pcba Removal - Lexmark MS81x Service Manual

Stapler controller PCBA removal

1
Remove the left cover. See
2
Disconnect all the cables (J11, J5, J6, J4, J26, J24, J22, J23, J17, J3, J2, J1, J18, J15, J1, J12, J14, J8, J20, J9, and J7),
then remove the three screws (A) from the controller PCBA.
"Stapler left cover removal" on page
Repair information
496
480.
4063