Transfer Roller Left Arm With Cable Removal - Lexmark MS81x Service Manual

15
Disconnect the cable (B).

Transfer roller left arm with cable removal

1
Remove the left cover. See
2
Remove the controller board access shield. See
3
Remove the media tray. See
4
Remove the front door. See
5
Remove the toner cartridge.
6
Remove the imaging unit.
7
Remove the media turn guide. See
8
Remove the MPF pick roller. See
9
Remove the MPF feeder lift plate. See
10
Remove the media vertical guide. See
11
Remove the duplex exit diverter. See
12
Remove the inner guide deflector. See
13
Remove the transfer roller. See
14
Remove the media aligner roller. See
15
Remove the sensor (toner density). See
16
Remove the right cover. See
"Left cover removal" on page
"Controller board access shield removal" on page
"Media tray removal" on page
"Front door removal" on page
"Media turn guide removal" on page
"MPF pick roller removal" on page
"MPF feeder lift plate removal" on page
"Media vertical guide removal" on page
"Duplex exit diverter removal" on page
"Inner guide deflector removal" on page
"Transfer roller removal" on page
"Media aligner roller removal" on page
"Sensor (toner density) removal" on page
"Right cover removal" on page
Repair information
313
277.
339.
288.
299.
305.
302.
300.
286.
289.
317.
297.
312.
283.
4063
351.